Laser Cut Final

Design:
After my first iteration I wasn't completely happy with the design of my object. So using the same themes, principles and shapes I started to brainstorm alternative structures that may prove more rigid and hold their form better. In iteration 1 [I1] I used paper to create the curve of the cylinder; although this gave the effect I wanted to a certain degree it was obviously not structurally sound. Similarly The cardboard base; I was able to raster this to create a hinge like effect that was unrealistic to achieve with harder materials.

I researched other laser cut designs and found these which I liked. I worked on developing them to work with my mood board.


Using these images as inspiration I applied these to I1. 


(Trial with paper cut outs)


I decided I would use 3mm MDF because I felt as though the thickness of the wood was proportionate to the scale of the model.

Firstly I trialed the joins to find the sizing that fit snug.
Hole 11mm + Insertion 11mm = too loose
Hole 10.8mm + Insertion 11mm = strong
So I used this principle for each of my joins.

The lateral join between each of the identical hexagon shapes took a few test trials.
Attempt 1: 
Insertion and hole did not align at all.



Attempt 2:
Couldn't fit all 6 parts together.
However I found it interesting that the object could join in a square. Which lead me to believe that was of the main design flaws here was that I had designed the insertion to be too long and not taken into account the 3 Dimensions of using MDF in comparison to 2 Dimensions on Adobe Illustrator.

The reason the join with the top "cog" piece worked so well was because the length of the insertion was 3mm (same as width of wood) which allowed for the angles to be more adaptable.




Attempt 3 (final): Successful Hexagon shape
I adapted this shape because I considered why the top join was so successful vut the side joins weren't and noted that it was because in the top join I was considering the depth of the 3mm MDF.



Note: I also adapted the top half of the hexagon piece to make it longer and thinner than the bottom half, my theory behind this being that this would allow the combined object to have a smaller circumference.
I didn't trial this so moving forward perhaps I would try the object with a true to form hexagon and compare the structures to see if there were any benefits to my design.

Also, I shortened the top length of the hexagon to try to modify the aesthetics of the object. I tried to highlight the depth of the MDF in that section.
I created hexagon cut outs in each of the hexagon pieces as I felt as though because of the nature of the materials I was using my design appeared quite calculated- which isn't in character to my mood board. So, my intention with these cut outs is to create that sense of organised chaos and spontaneity.


Combined Hexagon Structure:







Note: I found it interesting how when I was printing my design although the laser was on the same settings on the 3mm MDF it was not able to cut the whole way through. I also had an issue with my cut which I'm not 100% sure how it occurred. 3 of the side hexagons fit perfectly into the centre piece however the other 3 easily slide in and out of the designed hole although each piece is an exact replica of each other. I'm not sure if this could be due to the inconsistency of the density of the MDF however I am going to re-print the same design and see what happens. 


Moving forward:

It would be interesting to see how this design would work with other materials like acrylic and experiment with how that would effect the design with a thinner material eg. how I would have to reshape the joins because they're designed based off of the thickness of the material. 

I would also re design my object so that it is more resistant-currently it holds form but I think it loses form too easily. I would like to be able to take my design apart and re-assemble it with confidence that it will hold form. 

I would really like to get more intricate with my design on the hexagon pieces, although I think they're cohesive with my mood board I found other designs that are also very effective and relevant.







Comments

Popular posts from this blog

Work Flow

Physical Trials

3D Print Experiments