Posts

Showing posts from April, 2018

Electronics Experiments

Image
Digital Prototyping Workshop: I designed a system that responded to sound. The analog input from the sound sensor registered the different levels of sound from the environment and when the volume was >50 the green light would illuminate, >150 the blue and >200 the red light and the buzzer would be triggered. The Grasshopper Coding: The Final Product: Rhino: Command: "Grasshopper" Uno Read + Toggle + Panel Open Port Com Port Uno Write (PWM - change to analog) LED CIRCUIT exploring relationship between digital input and light.  Learnt how to breadboard and understand conduction of electricity througha cirbuit. PROGRAMMING WORKSHOP Learning coding to turn a light on Final Pattern for Intro: Having successfuly coded the inital part of my electrical design I looked into what lights were going to be able to give me the desired effect for the second part of my design. Single LED's wired seemed like ...

Mood Board

Image
Intention: To create a mood board that demonstrates contrast with different, shapes, textures, colours, eras and exploring how they can create one object or image working as one cohesive piece. Key Words: Contrast, Strong, Perspective

LED Experiments

Image
In this task I tried to explore all the different ways LED light can be influenced an interpreted.  -single, multiple and conflicting light source -distance from light source -reflection -how colour is refleccted through other materials -shadows/perspective -how the density of an object effects the light passing through

3D Print Experiments

Image
Before I started brainstorming I researched what the benefits of using a 3d printer were and how I can take advantage of these in my design process, I used the following website: https://www.3dhubs.com/knowledge-base/advantages-3d-printing - One of the key benefits was the design freedom so I decided I would try to take advantage of this functionality of the material.  Brainstorming: When I began researching and looking for inspiration for the 3D printing task the first thing that interested and me about this medium was the ability to make things move and hinge with more ease than previously with the laser cut design. I decided that this is something I would try to incorporate into my design. When researching for inspiration I found many designs that had themes consistent to my mood board however I struggled to find examples with more than one part. I used websites such as this to look at what types of ways this medium is often used to create connections between par...

Physical 3D Print

Image
First Designs: Cylinder Design: 1) Modifications: When considering what was required of this central pillar and evaluating the print time I decided to minimise it I shrank the design to x0.75 of the initial 40mm x 100mm design. I also hollowed the base as I felt like that wouldn't sacrifice the structural integrity Clips: Initially I designed 2 different variations of the clip with different sized openings to experiment with the flexibility of the plastic and to see if it was capable of performing the "snapping" movement around the tube that I had designed without breaking. In regard to that determining how big the gap had to be to allow this friction.  Physical Print:  My first print was unsuccessful as I had uploaded each of the clips into separate planes. However in this iteration I found that the Brim I had designed was effective. I then imported the designs from NetFabb to Cura as separate objects instead of together to p...

Laser Cut Final

Image
Design: After my first iteration I wasn't completely happy with the design of my object. So using the same themes, principles and shapes I started to brainstorm alternative structures that may prove more rigid and hold their form better. In iteration 1 [I1] I used paper to create the curve of the cylinder; although this gave the effect I wanted to a certain degree it was obviously not structurally sound. Similarly The cardboard base; I was able to raster this to create a hinge like effect that was unrealistic to achieve with harder materials. I researched other laser cut designs and found these which I liked. I worked on developing them to work with my mood board. Using these images as inspiration I applied these to I1.  (Trial with paper cut outs) I decided I would use 3mm MDF because I felt as though the thickness of the wood was proportionate to the scale of the model. Firstly I trialed the joins to find the sizing that fit snug. Hole 11mm + Insertion 11mm =...

Week 1&2

Image
Words to describe my Mood Board: Connected, reliant, strong, powerful, abstract, magnified I began this experimental process through brainstorming without limitations, such as materials, time etc. to try to maximize the possibilities from this concept. Demonstrated in this image of my first developmental ideas: After this I began to consider the resources available to me and through group discussion decided on the objects with the most potential. More detailed sketches: 1) Cut out Hexagons on Stand: 2 & 3)  Ribbed Structure & Vein Bowl:  4) Cylindrical Container: InDesign Screen Grabs: Hexagons on Stand: Base Vein Bowl: This concept proved challenging through the incorporation of creating a sturdy structure that curved and was made by the thin "vein" shapes and also making the combination of the base of the bowl and the "veins" when combined structurally integral. I chose an image directly from my...