Physical Trials




After consideration of the shapes of and sizes of the electronics for the lighting effect I wanted to design I looked further into physical designs of the individual segments of my overall structure.
-Base
-3 Arms
-Arm Joint
-Hanging piece.

Digital Iterations:

Basic Structure of my concept.

Button in centre and hanging centre piece as speaker, lights illuminating around base.

Pull the centre ball down and it flicks a switch which turns on the mp3 and speaker coming out of base.

On and off button on top of one on the legs.

On/off switch on base and layered acrylic stricture in middle to catch lights

Magnetic sphere where sits in torus shape on top to turn on/off the  mp3.


BASE:
Exploration of using a laser cutter - initial design being a cylinder - consisting of 3 parts; a kerfed area with teeth  that interlock to a top and bottom piece with pieces in place to hold the arms.


laser cut base - circle





I then considered the legs and how they would look as a 3D print and how they would  join at a single point.



After printing these out I realised how many different components to this design there were and I struggled to visualise how the final product would look - so I constructed this very rough, very quick model from cardboard to offer me a tangible object to work with.


Having this tangible object gave me a different perspective to the design. I felt as though the centre piece was trapped/lost within the rest of the structure - so I developed another cardboard iteration.


(This will have a thicker base) I prefer this model as I think it is simpler and more effective. It has the same general principles as my previous design so wont change any of my lighting progress however I think it allows for the design to be more visually effective.




I 3D printed this cardboard design in order to visualise how it would look using this material. The object in the back WAS a cube which I anticipated would hang around the single LED which would hang from this structure.
 I think this design would have been successful however I wasn't happt with the aesthetic effect of this coming out of a box. 



After making these I re-explored the logistics and seperate joins and parts required to create the complete structure. 

<-- This image is break down of creating both the base and the "Legs" using  a Laser cutter. The more I explored the logitics of this design I felt as though the design was un-necessarily complicated lost excitement for the project. I was struggling with how to create a poiint where they all join-I also considered the angle that the "legs" would enter the base on and how challenging/achievable that would be using a laser cutter. 

I moved on to considering using 3D printed base or legs to make the base and/or legs. My main issue with this was how the lights would fit iinto this design.

I wasn't happy with having such a large base that was obviously hiding all the electronics and I felt as though the lights which I wanted to be the focal point of my design were becoming increasingly hidden by parts that i was less happy with.


Design Redirection:

Having created the circuit for the lights and trying to make it functional with the previous design I thought it was inevitable I was going to need some sort of housing so I brainstormed how to incorporate them into the design.

1. Firstly I redesigned trying to incorporate the necessary housing I can up with this structure where the LED strip is inside the base and with intention of laser cutting out a pattern on the base
 and a signle light hangs from the X structure pplaced on the top. The idea for the cut outs in the box was inspired by my first light experiments -where I looked into shadows.
 
Measurements and logistics of box design.








FIRST ITERATION:






Intentions: To create  platform near the top where the Arduino Nano would sit, the top having holes in it for the legs of the 3d print to fit into.

Issues: The measurements of the box were out slightly so I referred to my previous tolerance test for the next iteration. The scale was too big.


SECOND ITERATION:


Intention: scaled down version and the correct tolerance on the joins. This time I also took into consideration the power and button holes. 

THIRD ITERATION:


For my third iteration I decided to explore how acrylic would look with my design as I had seen it looking really effective from other people in my class. I used the exact template from the 3mm MDF and cut out on the 3mm Acrylic. However the joins didn't work and were just slipping in and out. 

After readjusting the tolerance for the acrylic and incorporating my circuit I really liked the effect of the exposeed wires under the acrylic. So i decided to pursue this material.

FOURTH ITERATION


I considered adding a pattern to it as if I was using the MDF to see what  the outcome would be. However I decided I it wasn't necessary for this design. 

FIFTH ITERATION:


Now that I had the structure of my box I thought about the 3D printing component. The intention with this design is to feed the single LED through the one hollow leg and hang in the centre. I printed two different heights to see what would be most appropriate with relation to the other components of the design. I also quite liked the effet of the excess PLA the came out between layers so will experiment with illumating this to see what the effect is. 

SIXTH ITERATION:

I decided to create a housing inside the acrylic structure in order to hold the arduino whihc woud act as like a brain where the exposed wires would come from. And wrap this in the LED strip lights. 


I created the internal box again but this time with consideration to the brief and put in speaker holes.


i intend to suspend the MDF box inside the acrylic.

I like the design of this because I think it really show off the lights which I intended to be the focal point of my design but the difference in materials creates a contrast between modern (acrylic/3d) and traditional (MDF) textures. The concept of thigs hanging also keeps the relationship with my very first design. The exposed wires also add contrast to such a rigid structure as they're very fluid. 











Comments

Popular posts from this blog

Work Flow

3D Print Experiments